The average barbed wire fence installation cost for a five-strand fence measuring between 1,000 and 1,500 feet is approximately $1 to $3 per foot. Depending on local material and labor costs, however, you could end up paying as much as $5 to $6 per foot.
According to the latest NRCS estimates, a barbed wire fence costs over $2 per foot to build. So as you can see, the estimated cost of a barbed wire fence varies between $1.50 to over $2 per foot. In any case, building fence is expensive and the costs continue to increase.
To increase the effectiveness, one or two strands of barbed or electric wire may be strung along the top and/or bottom of a woven wire fence. Woven wire fencing can cost $0.40-$1.50 a foot with do-it-yourself installation, depending on height, size of the mesh openings and weight of the wire, or $350-$1,300 to enclose a square acre and $2,100 ...
Compared with barbed wire, wall spikes take up less space, and the cost is lower, but the firmness is stronger and the deter effect is greater. It's widely used on walls, gates, buildings, fences and so on for high level security fencing.
For a barbed wire fence, determine your desired height of the lowest strand and tie off around end post. You will repeat this step for the second strand of barbed wire after you have secured this first stand. Stretching a woven wire fence: Decide if you will stretch the fence to the end post or center stretch.
The 4 in. x 4 in. x 78 The 4 in. x 4 in. x 78 in. post is ideal for use as a line post in a barbed wire or non-climb fences. This pressure treated agricultural post is treated for long-term protection against rot fungal decay and termite attack in ground contact applications.
How to Build a Barbed Wire Fence ... If you think the techniques of building a barbed wire fence are downright obvious—you know, the "why, any fool can do that" type of thing—many of you will ...
A 5-strand barbed wire fence, or 5- or 6-strand high-tensile wire fence, requires a 6- to 7-inch-diameter post. For net wire fences, Gerrish recommends an 8-inch-diameter post. How to fix it: Keeping corner posts in the ground is Derynck’s chief concern.
The cost to install barbed wire fencing ranges from $700 to $3,500, but most people pay between $1,138 and $3,011. Get help with your fence installation.
What about barbed wire? It's a little less expensive than a woven-wire fence to build and has about the same average lifespan of around 20 years, Edwards says. The estimated $1,947.75/quarter mile cost of a 5-wire barbed-wire fence takes into account the following:
Most fences for cattle utilize barbed wire, especially for large pastures, since a good barbed-wire fence is effective and much cheaper to build and maintain than rail fences or netting, and will last longer if properly installed.
Labor was valued at $15.05 per hour for woven wire and $16.25 per hour for barbed wire, the average fence building custom charges reported in AgDM File A3-10, 2011 Iowa Farm Custom Rate Survey. These charges include the cost of equipment and tools for building fence, as well as labor.
The national average to install a barbed wire fence is $2,352. A homeowner can expect to pay between $1,217 and $3,607 for the project, but costs can be as little as $480 or as much as $7,500. It runs about $1.50 per linear foot, including installation.
Bird Spikes - Set of 10 x 48.8 Cm Anti-climbing Security for Your Fence, Walls & Railings to Prevent Human Intruders, Animals or Birds – For a Safe and Secured Perimeter – No Tools Needed (Brown)
The HISTORY. In 1876 salesman John W. Gates brought barbed wire to Texas when he wagered $1 million that he could build a fence that would capably contain cattle.